Myotek has been nominated for a BERM Supplier Town Hall Excellence Award for Exterior Vision from Fiat Chrysler Automobiles (FCA).  A major priority of Myotek’s design & manufacturing team is quality so being recognized again by FCA as a quality partner.

Myotek is excited to announce the entire Orange County, CA Tech Center was upgraded with super-efficient LED tubes which light the entire facility.   32 Watt inefficient fluorescent tubes were replaced with 17 Watt, long lasting, state of the art, LED tubes.  The 4000K Neutral White color is a perfect match for our facility.   Special thanks to RTK Energy of San Clemente, CA for implementing this upgrade and installation.

For more information, contact us at info@myotek.com or visit us online at www.myotek.com

January 22, 2017
Excerpt from Driving Vision News
The 2017 North American International Auto Show got under way—for press and suppliers, at least—around the time of the DVN US Workshop. The Detroit auto show has skidded quite a ways downward from its heights in the 1950s and ’60s when it seemed everyone in the world wanted an American car (and that was the only type shown).

Despite heavy promotion of the show as roundly international and all-inclusive, makers who did not display at the show included Bentley, Lamborghini, Maserati, Land Rover, Jaguar, Porsche, MINI, Ferrari, Rolls-Royce, and America’s own Tesla. These makers, amongst others, increasingly see the Detroit show as simply not relevant in a current-day automotive world where the North American innovation hot spots are in Silicon Valley.

This year’s Detroit motorama brought few jawdropping out-and-out surprises; rather, it was a showcase of the general trend toward higher lighting content on most vehicles offered in the world’s second-largest vehicle market. One crucial piece of the context that separates the Detroit show from others round the world is that the US is one of the two countries on the North American regulatory island: the United States has its own lighting regulations, significantly different to the UN (or UN-approximate) regulations recognised by most of the rest of the world. So most vehicles on offer in America—and therefore most vehicles on display at the show—have different lighting system specifications and particulars than their equivalents elsewhere in the world.

Red rear turn signals (photo) are allowed in America, for example, and front and rear sidemarker lights and reflectors are required, but side turn signal repeaters and rear fog lamps and DRLs are not. And ADB is still not yet legal in America, so models that come equipped in Europe are stripped of that feature for the American market. And it’s not just lighting regulations that are different; most all North American vehicle regulations differ substantially from their international UN counterparts, as do North American vehicle buyers’ habits and preferences, so it’s really quite a different mix of vehicles than might be found at Paris or Frankfurt or Shanghai, for example.

Overall, last year’s news is also this year’s news: more and more and ever more lighting content on the front, sides, and rear of vehicles, but this is not a one-way trend. The Toyota Corolla, for example, which set our world on its ear in 2014 as the first high-volume, popular-price car to come with LED low beams as standard equipment, has had a refresh that includes new lighting. The front lighting package is higher-content; both low and high beam are now done in LED technology. But the rear lighting package is lower-content: the turn signals are now red rather than amber. LED daytime running lights, though not required, are present on a lot more vehicles. Some of them, such as the ones on new Cadillac models, are intricately sculpted and designed. The car-lights-as-art revolution, though it got its start in Europe, has well and truly spread to American shores. The whole industry,

worldwide, is striving at an unprecedented rate to add glitz and fascination to what used to be purely functional, minimally-styled equipment. There’s a taillamp with a specular-gravel reflector surface that sparkles and shimmers from any viewing angle (photo).
There are clever new instantiations of light guides and textured elements, an unprecedented amount of lighting technology in traditionally-stodgy segments (pickup trucks, e.g.), and it is surely safe to say the old philosophy of vehicle lights as commodity items is shrinking in the American rear-view mirror. Jeep’s Wrangler, long slow to change, is updated this year with LED headlamps from Canada-based Magna and LED fog lamps from American expert supplier Myotek.  
Another trend on the obvious increase is the use of lighting for brand and model-range identity advertisement. Lincoln’s fancy new Continental has LED headlamps with lens elements that present in the shape of Lincoln’s logo, for example (photo). Audi, Mercedes, and BMW models all have strongly familial lighting themes. And even makers who choose not to lean quite so heavily on lighting for brand identification are putting more lighting content into their various models—Ford, for example, have expanded the use of their thick-optic LED headlamp technique first deployed on the F-150 pickup truck. Watch for comprehensive lighting-centred NAIAS coverage in the DVN Report to be published at the end of this month.

For more information about Myotek Industries, visit us at www.myotek.com or contact us at info@myotek.com


December 19, 2016
Excerpt from Driving Vision News 

The car lighting industry in America is very much not what it was in the past. For a very long time, the North American approach to vehicle lighting was to treat it as a commodity. Headlamps of standard size, shape, and construction were required on all vehicles for over four decades. Even after that constraint was struck down in the early 1980s, car lights continued to be viewed as a commodity; most research and development focused on cost reduction rather than technical advancement, and North American makers tended to be followers, doing “me-too” work with the least costly fruits of European innovation. That meant American drivers didn’t enjoy the same level or pace of technical and technological improvement in their car lights, but it also meant European and Asian automakers viewed themselves, with fair justification, as being out of the league of the American vehicle lighting industry.
That assessment is out of date; that’s not how it is any more. There are a great many American tier-1 suppliers putting in an enormous amount of skill, talent, passion, and work—and putting out a great variety of innovative, performant car lights. Not only lamps as good as any put out by the well-known European and Asian big-name tier-1s (though there’s plenty of that), but also best-in-class lamps befitting the highest-end automobiles from any maker in the world. And the American cultural talent for cost control hasn’t been discarded along the way. OEMs, no matter where in the world they might be, who don’t take a hard look at these less-famous American suppliers are seriously missing out.
Two such suppliers are Flex-N-Gate and Myotek. Flex-N-Gate make every kind of light found on the outside of a car, with a full palette of technology and technique. They sell an enormous quantity of lights to FCA, Ford, GM, and Nissan (and they get awards for how well they do it); they’re in aggressive project cooperation with automakers outside the NAFTA region, they’ve got working LED ADB prototypes just waiting for American regulatory approval, and they’ve got astounding and affordable design innovations available on a right-now basis.

Myotek is a remarkably agile company with a thoroughly (disruptively!) modern structure. They churn out rapid innovation in small lamps with an especial focus on uncommonly great LED fog lamps, and OEMs recognize their outstanding lamps and expert mastery of 21st-century supply chain logistics with awards for quality and ease of cooperation.
The American sector of the vehicle lighting world is too big to fit in one report, so there will be more of them. For now, this forthcoming DVN report shines light on some less-known American lighting suppliers to give the world’s OEMs an opportunity to replace obsolete old assumptions with enticing new information. It focuses on Flex-N-Gate and Myotek, with ample presentation of other shining lights of the American industry. Facts, figures, and photos are presented, and there are interviews with the key engineers, designers, and executives who make the magic happen.

 

myotek-50mm-led-foglampss-Myotek has won a quality plaudit from Fiat Chrysler Automobiles. The LED vehicle lighting supplier, headquartered in California with manufacturing plants in Taiwan, Hong Kong and China, were praised by the automaker for outstanding quality performance in the 2014 calendar year. FCA’s criteria for the award include quality and warranty scores of 100% for all twelve months of the year. No quality problems requiring 3rd-party containment, vehicle sale holds or parts sourcing holds, and compliance with TS-16949 certification requirements.

As previously reported in DVN (DrivingVisionNews.com) , Myotek supplied a 50mm LED front foglamp with global approval, high performance and low power consumption. The LED fog lamp is used on a variety of FCA vehicles including select models of Jeep, Dodge and Ram.

For more information about Myotek or our 50mm LED front fog lamp, contact us today at info@myotek.com or visit us online at www.myotek.com

Myotek adds new equipment to its capabilities as the Irvine, California Tech Center continues to expand.  We’ve added an Objet500 Connex3  3D Printer, a 40” Integrating Sphere to better analyze lamp performance and a CMM for part inspections.  We also have a fully automated 4-axis glue machine and a ‘Quick Scope’ Vision Measuring Machine for inspecting parts.  This new equipment will enhance our in-house design capabilities from inception to completion.

 

sphere myotekvision inspromer myotek

glue machine

 

 

new myotek staffMyotek is pleased to introduce Sean Godinez to the Myotek Team as our new R&D Engineer!  Sean is quickly digging in to his new role.  Sean has a BS in Mechanical & Aerospace Engineering and he interned at NASA, JPL & Swift Engineering before joining Myotek.  Outside of work, he likes to keep busy with a ground up restoration of his ’69 Impala.

After demonstrating nearly two years of stellar performance, Stephanie Hoffer has earned the role of Senior R&D Engineer! She continues to elevate our prototyping, simulating and analytical capabilities. Meanwhile she is also proving to be an effective teacher, as she is busy introducing and training Sean.

We also have a new Design Engineer (Adam Kus) who will be reporting for duty on April 18th.  Adam has Automotive lighting design experience from his past work at Stanley.  He and his wife Heather are relocating from Charleston, SC to Irvine.

For more information about Myotek or our Orange County, CA. Tech Center, contact us today at info@myotek.com or visit us online at www.myotek.com